• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources

2 speed Drilling auger drives

2 Speed Std Flow up to 8T

Digga's 2 speed drilling auger drives for standard flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1.

Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes with flows between 20 and 150 lpm.

  • Improved motor design & performance with 2 Speed options:
    • Low speed - High torque for large holes
    • High speed - Low torque for smaller holes
  • Suitable for a wide range of ground conditions:
    • Soft loose soils, hard soils, and rocky conditions
  • Integrated PRV (Pressure Relief Valve)
  • Simple electrical connection:
    • 12 or 24 volt coil, just requiring connection
    • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
  • Low maintenance with 5yr gear box and 3yr motor warranty

Features & Benefits

Digga drives come packed with really practical features like top mounted hose ports, cutting edge design, and a 2 piece shaft just to name a few. Hover your mouse over the features´ 'plus' symbol on the diagram below to reveal the respective benefits.

2 Speed Standard Flow Auger Drive Specifications

Specification pdT3 pdT6 pdT8HF
Recommended Flow 20-75 lpm 20-75 lpm 40-150 lpm
Max Torque 2954 Nm 4664 Nm 7881 Nm
Motor 2K Bell EATON 2K Bell EATON VIS EATON
Pressure Valve Fitted Included Included Included
Energy Control Valve N / A N / A Optional
Case Drain Required Optional Optional Yes (Included)
Max Pressure Do not exceed 200 bar @ 76 lpm Do not exceed 240 Bar @ 150 lpm
Max Flow Do not exceed 76 lpm @ 200 bar Do not exceed 180 lpm @ 200 Bar
Max Continuous Power Do not exceed 25 Kw (34 hp) Do not exceed 60 Kw (80HP)
Overall Length 766 mm 877 mm 952 mm
Diameter 240 mm 240 mm 340 mm
Weight (no frame / hitch) 75 Kg 104 Kg 158 Kg
Std Output Shaft 65 mm Round 75 mm Square 75 mm Square
Swing Control Optional Optional N/A
Diggalign Optional Optional Optional
Rec Auger 4 Series 4 Series / 6 Series 6 Series
Max Auger Dia Clay / Shale 400 mm 600 mm 1000 mm
Max Auger Dia Earth 500 mm 900 mm 1200 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.