• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources

Drilling auger drives



Truck Crane / Telehandler Auger Drives

Digga's PDX2 to PD10 range of earth drills are ideally suited for truck cranes and telehandlers with a flow between 30 to 115 lpm. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are fitted with Digga/Danfoss bell motors specially designed for drilling and augering in most ground conditions.

  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with a DIGGA Bell Motor by Danfoss
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • HALO alignment system available for PD3-PD7 auger drives
  • Low maintenance with 5yr gear box and 3yr motor warranty

Features & Benefits

Digga drives come packed with really practical features like top mounted hose ports, cutting edge design, and a 2 piece shaft just to name a few. Hover your mouse over the features´ 'plus' symbol on the diagram below to reveal the respective benefits.

specs see it in action

Premium Drive Specifications

Specification PDX2 PD3 PD4 PD5
Rec Flow Range 30-50 lpm 45-75 lpm 55-85 lpm 60-95 lpm
Nominal Torque 2307 Nm 3544 Nm 4448 Nm 5151 Nm
Motor 2K Geroler 2K Geroler 2K Geroler 2K Geroler
Pressure Valve Fitted Optional Optional Optional Optional
Energy Control Valve N / A N / A N / A N / A
Case Drain Required No No No No
Max Pressure -   -   -   -   -   -   -   -   -   -   Do not exceed 240 bar @ 60 lpm  -   -   -   -   -   -   -   -   -   -
Max Flow -   -   -   -   -   -   -   -   -   -   Do not exceed 115 lpm @ 130 bar -   -   -   -   -   -   -   -   -   -
Max Power -   -   -   -   -   -   -   -   -   -   Do not exceed 25 Kw (34 hp)   -   -   -   -   -   -   -   -   -   -   -
Overall Length 557 mm 579 mm 579 mm 579 mm
Diameter 187 mm 240 mm 240 mm 240 mm
Weight (no frame / hitch) 45 Kg 57 Kg 58 Kg 67 Kg
Std Output Shaft 65 mm Round 65 mm Round 75 mm Square 75 mm Square
Swing Control N / A Optional Optional Optional
Diggalign N / A Optional Optional Optional
Halo Optional Optional Optional Optional
Rec Auger 4 Series 4 Series 4 Series / 6 Series 6 Series
Max Auger Dia Clay / Shale 450 mm 600 mm 750 mm 900 mm
Max Auger Dia Earth 600 mm 750 mm 900 mm 1000 mm
PD6 pd7 pd8HF
Rec Flow Range 70-115 lpm 75-115 lpm 80-200 lpm
Nominal Torque 5596 Nm 6040 Nm 7136 Nm
Motor 2K Geroler 2K Geroler 6K Geroler
Pressure Valve Fitted Optional Optional Included
Energy Control Valve N / A N / A Optional
Case Drain Required No No No
Max Pressure -   -   - Do not exceed 240 bar @ 60 lpm  -   -   - Do not exceed 240 bar @ 130 lpm
Max Flow -   -   -   Do not exceed 115 lpm @ 130 bar -   -   -   Do not exceed 230 lpm @ 130 bar
Max Power -   -   -   Do not exceed 25 Kw (34 hp)   -   -   - Do not exceed 50 Kw (67 hp)
Overall Length 730 mm 734 mm 950 mm
Diameter 240 mm 240 mm 290 mm
Weight (no frame / hitch) 89 Kg 90 Kg 149 Kg
Std Output Shaft 75 mm Square 75 mm Square 75 mm Square
Swing Control Optional Optional Optional
Diggalign Optional Optional Optional
Halo Optional Optional Optional
Rec Auger 6 Series 6 Series 6 Series
Max Auger Dia Clay / Shale 900 mm 900 mm 1000 mm
Max Auger Dia Earth 1000 mm 1000 mm 1200 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.