• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources
specs gallery see it in action

Flail mower for
3-10T Excavators

Digga’s Flail Mower for Excavators up to 10 tonnes has been engineered to handle your toughest vegetation management jobs. Ideal for clearing vegetation on hillsides, roadways, ditches, utility right-of-ways, riverbanks, lakes and more.

Impact absorption

The torsion disc improves on conventional rubber disc isolation technology by using metal springs to absorb stress forces experienced during operation. Rubber discs can oxidise and eventually break, leading to possible damage to the drivetrain. Our torsion disc metal springs will outlast the rubber disc in other flail mowers.

Smoother cuts

Unlike other Flail Mowers, our patent-pending staggered blade pattern significantly reduces the transfer of cyclical impact forces to the drivetrain. This reduces wear and tear on the entire drivetrain maximising its operational life. It also provides a smoother experience for the operator when mowing or cutting.

Drivetrain protection

Some Flail Mowers have only one flange with the other rotor assembly end exposed to dirt and debris. Others use smaller flanges, which also leave the rubber isolation discs exposed. The Digga Flail Mower has a heavy duty flange on both ends of the rotor to protect the drivetrain and prevent wire from causing damage.

Unobstructed cutting access

Equipped with adjustable skid shoes that allow material to contact the blades without obstruction in either direction. Other Flail Mowers incorporate rollers useful for following the terrain but obstruct access to the blades. Material can also get caught in the roller.

Increased safety

The blades on our Flail Mower come to a complete stop in 4-5 seconds when connected to the bi-directional circuit. Other Flail Mower blades can take up to 20-30 seconds to stop completely when shut down. This may pose a safety concern for the operator or bystanders.

Trust your equipment

  • 2 Models available 760mm (30") and 1000mm (40")
  • Digga Flail Mowers are heavy duty, quality, more durable & better engineered
  • Our drive train & blade system are designed to out-perform and outlast the competition
  • Bi-directional cutting & discharge allows the operator to control the direction of cut materials away from buildings, roadways & bystanders
  • Digga Flail Mowers easily manage grass, vegetation & hardwoods up to 100mm in diameter. Diameters up to 150mm can be managed as well on an occasional basis
  • The adjustable skid shoes do not interfere with or obstruct cutting capability in either direction
  • The manifold can be mounted on either side for optimal hose routings
  • Blades come to a complete stop within 5 seconds when connected to the bi-directional circuit increaseing safety for operators and bystanders
Specification
Model 760mm / 30" 1000mm / 40"
Rec Flow Range (lpm) 65 - 85 120 - 150
Max Pressure Do not exceed 240 Bar Do not exceed 240 Bar
Stump Cutting Diameter (mm) 100 100
Rotational Speed (rpm) 1800 - 2200 1800 - 2200
Machine Suitability (tonnes) Up to 6 6 to 10
Case Drain Required Yes Yes
Overall Width (mm) 813 1065
Cutting Width (mm) 760 1020
Cutting Depth (mm) +35mm above ground +35mm above ground
Weight (kg) 380 533
Blade Stations 8 10
Rotor Diameter 600mm 600mm
Maximum Shredding Diameter 600mm 600mm
No. of Blade Stations 8 8
No. of Blades 16 x Side Blades/8 x Straight Blades 20 x Side Blades/10 x Straight Blades
Motor Enclosed in Frame Yes Yes
Power Transmission Direct Drive Direct Drive
Supporting Service Leg Skid Shoes (x2) Skid Shoes (x2)