• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources
Pallet Fork Multifit - Digga Australia

#

specs see it in action

Premium anchor drives for 15-22 tonne excavators

Digga's PDT18 - PDT22 Premium drive range of screw pile anchor drives for excavators between 15-22T. The PD Anchor drives produce between 27,000Nm to 31,000Nm. Fitted with our patented anti-kickback valve, which controls the rapid decompression of oil caused during the application of foundation piles, you’ll get maximum life and performance. Using only superior quality, highly volumetric efficient hydraulic motors, Digga anchor drives can be fitted with a selection of motor options to efficiently utilise the total available horsepower of your machine. 2 Speed drives offer speed when you need it or higher torque when the going gets tough. It's like owning 2 drives in 1.

  • High speed, low torque mode – Perfect for small-diameter screw anchoring, rapid spoil removal, and cleaning the base of the hole. Tasks that typically require speed, such as finishing or clearing out loose material, are completed faster and more efficiently.
  • Low speed, high torque mode – Ideal for heavy-duty drilling applications using large-diameter screw anchoring, especially in tough, compacted, or rocky ground. This setting delivers the brute power needed to break through challenging conditions without stalling or overloading the drive.

The 'PD' (Premium Drive) range of drilling drives has been the workhorse of the industry - With innovative ground-breaking design features that keep it ahead of the game; such as the development of the Digga/Danfoss Bell motor, which was specifically designed for Digga attachments, utilising DANFOSS Geroler technology, significantly reducing the weight, and overall length of the anchor drives.

Learn about anchor drives

Pair your drive to suit your machine type and achieve optimum performance, find out how to avoid costly repairs, and how the anchor drive has technologically developed over the years.

Built-In ECV

Digga’s Energy Control Valve also known as Swoosh Valve can be fitted to all PD drive units for screw anchoring applications. ECV comes standard on all Digga anchor drives.

Compact & powerful

Digga’s range of drilling drives was developed for the professional driller - utilising Geroler technology by Danfoss, the drives design significantly reduces weight whilst delivering outstanding performance.

Industry leading performance

By utilising the Danfoss Bell motor, the anchor drive will accept 60kW of power, delivering exceptional power-to-speed ratio when coupled with the industry leading Digga planetary gearbox.

2 Speed Controller

Operate between 2 speeds from high and low speed settings. Reach a high speed for clearing and removal, and a low speed for dedicated large applications. The 2 speed switch can also operate with a mounted remote joystick, or a floor mount.

Advanced design

The Digga gearbox utilises a two-piece shaft design, the shaft is a separate component to the planetary carrier, isolating the planetary gears from the pushing, pulling, and bending forces generated by the host machine.

Precision accuracy

Now included in all PDT18 - PDT22 Anchor Drives, the new innovative Halo alignment system ensures holes are drilled plumb and reduces the need for in-hole angle adjustments. The highly visible LED indicator wraps around the Anchor drive and will shine green when straight, allowing you to never take your eyes off the job to realign your auger.

Australian made quality

Digga drive units are made right here in Australia from quality materials. Digga is a proud Australian manufacturer committed to keeping jobs in the country.

Specification PDT18-SV PDT22-SV
Rec Flow Range 40-180lpm 40-180lpm
Max Torque 18,344Nm 22,606Nm
Motor 6k Geroler
Pressure Valve Fitted Included
Energy Control Valve Included
Case Drain Required Not Required
Max Pressure DO NOT EXCEED 240Bar @ 150lpm
Max Flow DO NOT EXCEED 180lpm @ 200bar
Max Power DO NOT EXCEED 60Kw (80 hp)
Overall Length 979mm 979mm
Diameter 340mm 340mm
Weight (no frame/hitch) 190kg 190kg
Std Output Shaft 75mm Square 75mm Square
Swing Control Optional
Diggalign Optional
Halo Included